The KD StarTwin 685 is another example of KD Kanopy’s commitment to innovation and design. These large tents are a tension fabric structure supported by two center-poles with tension through the center poles. The StarTwin 685 stands 19‘ tall, and has an overall length of 63’ long, and seats approximately 66 people at banquet tables. The StarTwin folds down into 4 carry bags, which fit in most standard vehicles. The poles are made of high stregth aluminum and have a diameter of 4”. The Unique Design of the StarTwin was invented by KD Kanopy in 2004. The six elegant arches give added visual appeal and, at 7‘6” high, offer ease in entering the covered area.
(WIDTH x DEPTH*) 43′ x 63′
HEIGHT* | Peak: 19′ | Top of arched openings: 7′ 6″
Shipping Weights & Sizes*
Poles: 73 lbs. — 12″x12″x58″ shipping box (2)
Top: 95 lbs. — 30″x22″x22″ shipping box
Hardware: 55 lbs. — 8″x8″x45″ shipping
Suggested Seating Capacity
Chairs Only: 106
Banquet Tables and Chairs: 66
Items Included in package
Lifetime manufacturer’s defect warranty on poles
1-year manufacturer’s defect warranty on top
Move cursor over color swatches to view.
Screen Print: We use a UV ink that is cured into the fabric. Durable and long lasting, allowing your logo to stand out!
Digital: Full bleed color, digitally printed with UV ink that is guaranteed not to fade and keep your graphics vibrant looking and long lasting.
Dye Sublimation: Full color transfer that is ideal for indoor shows and the material is washable.
Determine the location of the StarTwin by measuring an open area of 43′ x 63′. Verify that this space is clear of debris, sprinklers, or gas lines.
Caution: Check site for overhead power lines and underground sprinkling systems. Avoid use during heavy downpours and strong winds. Refer to your warranty for conditions which are exempt from coverage.
Stretch our Cable #1 to mark the length of the StarTwin. Insert a spike into the end loops at position A and B of Cable #1. Drive these stakes into the ground.
Stake the center plates at the middle loops C and D of Cable #1. Do not stake cable #1 down, it is for measuring purposes only. You are now finished using Cable #1.
Attach the end loops of Cable #2 to the spike in position A and the center plate in position C. Stretch the cable into an arrow shape until both ends are taut. Place a spike through the center loop of Cable #2.
Repeat this step in the opposite direction and then for each side of the stakes at positionD and B.
Using a sledgehammer, drive all stakes into the ground. Leaving the head of the stake above ground.
Take all shoes and slide over stakes. Your tent should be totally stretched out over the ground with each shoe attached to a stake.
Take pole with dome, slide one pol into fitting, then another and so on. The pole should have the dome on top, all others in between and the last pole should be the one with the jack.
Insert the assist bar into the hole in the jack pole. Two people lift the assembled center pole by the assist bar and go underneath the tent. Insert the dome cap of the center pole into the ring sewn into the top of the StarTwin.
After attached continue to put pole upright until it is resting on center stake. Remove assist bar. Take jack handle out of case, attach to jack shaft. Turn clockwise.
Your unit id ready for use. Take down? Follow steps in reverse order.